155XL2
When it’s time to get the job done right and get it done fast, look no further than the 155XL2. Able to be pulled with less horsepower than larger scrapers but still maximizing on capacity, this scraper is sure to make quick work of ditch clearing, water management, field prep and more. As a dolly wheeled unit, the 155XL2 doesn’t require a special scraper drawbar, making it a simple scraper to hook up to any tractor and get right to work.
Find a Dealer
155XL2 Overview
Rear Pushbar
A rear push bar extension is standard equipment on the Ashland 155XL2 scraper to keep you rolling in any condition. Built tough to handle push loading assistance from a small dozer or check out our oxblock pusher attachment to turn your existing Case Steiger into an earthmoving support tractor.
Strong Front Section
The large 16″ front section pipe and oversized trailing arms put the strength where it is precisely needed. The various stresses of scraper operations, pulling, lifting, carrying, are distributed uniformly between the front pipe and trailing arms. This is much better than competitive models that use square or rectangle tubing for their front sections. The stresses will concentrate on the corners of a square or rectangle tubing front sections.
Floatation
The 155XL2 has taken floatation to a new level. The front dolly wheels come standard with 20.5 x 25 OTR wheels. However, most customers usually want superior floatation; the optional 23.5 x 25 OTR front tires upgrade keeps you going in harsh conditions. . The standard 29.5 x 25 OTR rear tire keeps the rear of the scraper climbing up onto soft conditions. The long rolling radius of these tires makes climbing up steep slopes much easier with less power than competitive scrapers with smaller tires.
Superior Visibility
The large 16″ front section pipe is placed high to provide the operator with excellent visibility of the blade while loading from the tractor cab. Large cut-outs have been placed on the ejector rack allowing you to see behind the scraper for increased safety while operating. When scraping, the left-side front gate viewing window will enable you to observe the loaded material inside the scraper bowl.
Strong Floor
The five-piece blade system, oversized plow bolts, and dual plated floor design, stumps, tree roots and large rocks are no match for this scraper. This is especially beneficial when doing land clearing on new land.
Debris Protection
The 155XL2 provides excellent protection from debris while operating the scraper. The lower portion of sidewalls on the 155XL2 clean and have no bulk frame members to collect debris and start to pile up. Thick steel dirt shields cover the front gate and ejector cylinders from damage from falling debris.
GPS Laser Adaptable
Ashland Scrapers are GPS ready for the efficient excavation and placement of bulk material to meet your farm water management needs.
One Year Warranty
Trusted to do more. Our rich history provides us the upmost confidence in protecting your earthmoving investment.
Dolly Wheel
Easily connect to any tractor with a standard Ag Hitch. No special drawbar required.
Top Load
Tilt the back rack to create a larger target for easy top loading when the job requires.
CE Certified
Built to the highest standard of quality and sustainability with CE Certification
155XL2 Specs
Heaped Capacity (ISO) |
15.5 yd3 |
|
Recommended HP |
250 - 620 hp |
|
Width of Cut |
108.5" |
|
Apron Clearance |
62" |
|
Ejector Cylinder (1) |
5" x 60" |
|
Apron Cylinder (2) |
4" x 13" |
|
Lift Cylinder (2) |
5" x 20" |
|
Laser/GPS Bracket |
Standard |
|
Tires Std. Front |
(2) 23.5 x 25 |
|
Tires Opt. Front |
(2) 23.5 x 25 |
|
Tires Std. Rear |
(2) 29.5 x 25 |
Overall Width |
120" |
|
Overall Length |
360" |
|
Overall Height |
95" |
|
Weight (w/ Std. Tires) |
21,650 lb |
|
Weight (w/ Opt. Front Tires) |
22,086 lb |
