Ashland Industries Corporate
  • HOME
  • ABOUT US
    • OUR HISTORY
    • OUR TEAM
  • PRODUCTS
    • AG. DOLLY WHEEL
      • 950XL2
      • 140XL2
      • 140XL2-LGP
      • 155XL2
      • 175XL2
    • AG. DIRECT MOUNT
      • 3250SS
      • 50CS
      • 140TS2
      • 140TS2-LGP
      • 1410E
      • 155TS2
    • CONSTRUCTION DIRECT MOUNT
      • 2012CS
      • 2014CS
      • 215TS2
      • 220TS4
      • 2411E
      • 2811E
      • 3013E
      • 3413E
      • K-Tec Scrapers 28+ cu.yds.
    • DISC HARROWS
      • EHDW-3620-14
      • EHDW-4220-14
    • PARTS BOOKS
  • SCRAPER DRAWBAR
  • SUPPORT
    • MOBILE MECHANIC
    • PARTS BOOKS
    • WARRANTY
    • OWNER REGISTRATION
  • CONTACT
  • DEALERS
    • Dealer Portal
    • Dealer Locator
  • Menu Menu
  • FIND A DEALER
  • PRODUCT DOWNLOAD
  • REQUEST A QUOTE

The 2811E

Under 12ft. Road Transport

The 2811E is one of the four new ejector scrapers introduced this year. This scraper bowl width and height is the same as the 2411E. The bowl’s length is simply 12″ longer, increasing the heaped capacity to a productive 28 cu.yds. The 2811E is the only high capacity scraper that is under 12ft. road transport reducing your mobilization cost from costly escorts or permits.

The future is now.

Ashland is excited to share 4 new larger capacity ejector scraper models for 2020 & 2021. The 2411E (24 cu.yd.), 2811E (28 cu.yd), 3013E (30 cu.yd.) and 3413E (34 cu.yd.). Ashland implemented a modular design between these four new models that share standard components (floor, sidewalls, apron, ejector frame, etc.), translating into greater flexibility and efficiencies while offering the end-use excellent value.   The new scrapers use Hardox® wear plate which is the world’s leading abrasion-resistant (AR) steel. Hardox® is hard through and through, from the surface deep down to its core, giving you extended service life and high productivity in the most challenging environments.

1
2
3
4
5
6
7

Hitch System:

The direct mount scraper 360-degree swivel hitch is closely coupled to the specialized tractor drawbar, which provides better weight distribution between the tractor front and rear axles.

Front Hydraulic plumbing:

The weight of 3/4″ front hydraulic connecting hoses is supported by a spring-loaded hose carrier, providing an ideal coupler connection between the tractor and the scraper. This reduces premature coupler wear and accidental coupler “pop-out” from hose weight or binding while operating.
A thick rubber pad keeps the couples off the ground when the scraper is not in use.

Front Section:

The backbone of the front section begins the heavy wall 16″ pipe. This robust front section pipe reduces the high stresses experienced while loading, transporting, and lifting fully loaded scrapers. Large cast steel flanges are applied to the middle of the front section pipe provide commonality of parts between multiple models. This offers more flexibility and increased efficiencies at the factory; more importantly, it gives the end-user excellent value for the dollar.

Easy Unloading

The combination of 2811E spacious 74.25″ front opening and the 25.62″ ground clearance, the material can exit the scraper unobstructed, which reduces double ejecting thicker material. Allowing the operator to place material exactly where it is needed, which increases your daily production.

Easy Loading :

We lowered the connecting point of the front section trailing arms to the scraper bowl down near the blade to provide easier pull while reducing the duck-walking while loading. Allowing the operator to maintain a higher loading speed, more constant tractor RPM, which translates to larger payloads.

Hydraulic System :

The 2811E requires three hydraulic remotes to operate the machine.  One circuit controls the lift cylinders. The second circuit controls the apron  and the third circuit operated the ejector system.  This allows the operator full control of all the functions independently.

Wheel System:

The multiple holes within the rear frame enable the operator to position rear axles in numerous positions. Select to place all the tires to be “in-line” for increased compaction or “offset” for better floatation and less mud build-up. So, regardless of your soil condition, there is a tire package available to keep you floating on the soil and moving forward. 

Quick daily service
Daily maintenance is short work, whereas there is only six daily grease points located on the front hitch. The ejector wall is guided with large plastic blocks, and all the pivot joints, cylinder pins, and floor rollers utilize oversized pins with self-lubricating bushings.

SPECS

Capacity, Heaped: (ISO 6485) 27.8 cu. yd.
Capacity Struck: (ISO 6485) 17.4 cu. yd.
Required HP: 500+
Width of Cut: 132.25”
Apron Clearance: 74.25”
Depth of Cut: 9”
Depth of Spread: 0 – 25.62”
Ground Clearance at Blade: 25.62”
Pushoff Cylinder (1): 5.5” x 66.5”
Apron Cylinder (2): 5” x 22”
Lift Cylinder (2): 5.5” x 24.5”
Tractor Hyd. Rear Hoses: (3-pair) 3/4″ dia. with 1/2″ couplers
Tractor Hyd. Lead Hoses: (6-pair) 3/4″ dia. with 1/2″ couplers
Tires: (Std. Rear (4) 23.5 x 25 Radial
Overall Width: 11′ 11-3/8”
Overall Length: 32′ 6-1/2″ (w/o pushbar or hitch)
Add 12″ for Pushbar – Add 9.5″ for Quick Hitch 9.5″
Overall Height: 111.3”
Weight: 32,000 lbs.**
Weight Transfer 22.5% Tractor – 77.85% Scraper
Lighting System: Standard
Laser/GPS Bracket: Standard

Tandem Configuration: Optional
Pushbar Extension: Optional

GALLERY

2711E Nearly same as 2811E
2711E Nearly same as 2811E 2711E Nearly same as 2811E 2811E Scraper loading Apron Cylinder 2811E Scraper Front Section Ashland Scraper Front Yoke Hitch 2811E Scraper Apron Cylinder Tilting Headache Rack Hydraulic Hose Storage Apron Opening Gauge 2811E scraper-tractor-earth-moving-equipment Hydraulic bulk head Rear Quick Hitch for Front Units on 2411E, 2811E & 3013E 2811E Scraper Front view

Products

Dolly Wheel

Direct Mount

Dump Style

Compact Line

Disc Harrows

Popular
Recent
Comments
Tags

COMPANY

About Us

Privacy Policy

CONNECT WITH US

46°35’53.3”N 90°50’25.5”W
P.O. Box 717
1115 Rail Drive
Ashland, WI 54806

(877)634-4622

KA Group Logo

Ashland is an earthmoving equipment brand of the K.A. Group.

© Copyright 2022 - Ashland Industries Corporate
Scroll to top
Contact Kelly Goossen

phone: 1-204-746-6435
email: kelly.goossen@ka.equipment